STOLEN

BACK

Thats the frame done

 

THIS SCOOTER WAS STOLEN FROM ASH (SURREY) ENGLAND ON THE 7th SEPTEMBER 1999 AND IS WELL MISSED BY ALL THE HARDLY RIDEABLES AS A FEW OF US CONTRIBUTED TO HELPING REG BUILD THIS SCOOTER AND WE ARE NEEDING ANY INFOMATION ON THE WAREABOUTS OF THE SCOOTER OR ITS PARTS

Nearly finished

The finished scooter only went to the isle of wight 99

SCOOTER DETAILS

FRAME

The Frame is very modified as you can see it started as a vespa P range with every thing cut off apart from the main membrain of the frame and a set of motorcycle forks and head stock welded on the front. The back end is part triles bike and 12mm bar with a small triles bike light fitted into the back end.The fuel tank is a mustang with a aircraft filler cap with a breathing pipe fitted.Gearchange is a lambretta modified for handlebars.The speedo is standard PE and the rev counter is a T5 fitted into a vespa PE speedo housing ,IGN is a honda,dohterty throttle, street fighter/trilesbike twin light faring.The front hub and wheel is lambretta modified to fit into forks with a Prelli SL26 110/80 tyre, the rear tyre is STD vespa with a S1 tyre .All the Electrics ie.regulator (shaved to fit in) Ign coil(also cut to fit in) were fitted in to the rear end of the scoot. The lights switches were fitted into the head stock near where the origoinal vespa ign sat.

ENGINE

The Engine125cc Casings DR 180 kit, malossi reed valve, polini gear up kit,P200 gears,P200 clutch, HP4 flywheel, 28mm delorto carb, one off left hand exhaust made from various scooter exhausts.

 

INFOMATION

IF ANY ONE HAS ANY INFOMATION ON THIS SCOOTER PLEASE MAIL US AND THEIR WILL BE A REWARD LEADING TO THE RETURN OF THE SCOOTER

mail us on

hardlyrideable@hotmail.com